Automatic heavy pressure hot die cutting machine

Automatic heavy pressure hot die cutting machine Product introduction

Paper-feeding part

1. Independently developed GW high-quality Feida head, 4 suction cups and 4 suction cups to ensure stable and fast paper feeding, and avoid paper scratches caused by traditional wool wheel.

2. The paper changing device does not stop, and Feida does not stop. The maximum height of bulk paper is 1600mm.

3. The pre-stack paper device is equipped with a track so that the operator can accurately and conveniently send the aper stack into the feida.

4. Side gauges can be adjusted between push and pull gauges to meet different paper needs.

5. Fuji servo motor from Japan is used for regulating the front gauge; The position of the front gauge can be displayed accurately through the touch screen, and the adjustment can be carried out quickly, with the adjustment amount accurate to 0.01mm.

6. Slow down the feed to the front gauge to position the paper accurately.

Die cutting part

1. The servo system is adopted, and the pressure can be precisely controlled by the man-machine touch screen keys. The adjustment amount is accurate to 0.01mm.

2. The die-cutting plate frame and the die-cutting underplate adopt Japanese SMC cylinder locking, to avoid the upper and lower plate frame locking installation is not in place, effectively avoid the loss caused by human factors operation.

3. Die - cutting plate frame using the center line positioning mode, so that operators in the installation of die - cutting plate no longer need to consider the left and right position of the die - cutting plate.

4. Also through the use of auxiliary tools, the installation of non-standard size of the die-cutting board, for the convenience of customers to realize the common between different models of die-cutting board.

5. The tooth row adopts adjustable tooth row structure, which is convenient for operators to maintain the production accuracy of the machine during the use of the machine.

Paper receiving part

1. Adjustable brake brush controlled by AC motor to help remove paper from the teeth and stack.

2. The paper receiving department can control the whole machine through the 10.4-inch touch screen.

3. The auxiliary paper receiving stand can realize the paper receiving without stopping. When the paper receiving stand is replaced, the machine will automatically slow down to ensure the paper receiving is tidy.

4. Servo motor can adjust the back gauge of the receiving part, which can adapt to various sizes of paper.

Electrical part

1. For the functional requirements of the machine, the control of traditional small PLC is abandoned. Independently developed suitable for machine use, reliable performance of the control system.

2. The motor is controlled by Schneider inverter and servo controller, which ensures the accuracy of all parts of the machine.

3. All power supplies are supplied by Taiwan Mingwei switching power supply to ensure the stability of power supply and avoid operation hazards caused by unstable power supply

4. The die-cutting and paper receiving departments are equipped with 15 inch and 10.4 inch touch screens respectively.

5. The machine adopts German Moeller's relay, AC contactor and air switch, which ensures the stability and reliability of the electrical part.

Chinese machinery supplier
National Service Contact us:
TEL: 0731-84812133
Contact: Mr. CAI
E-mail:cai@0086machine.com