Full automatic high speed bulk packing machine

Full automatic high speed bulk packing machine Product Introduction

The bulk press is a new type of equipment for pulping waste paper. This machine is mainly used for the bulk packing of waste paper and the screening of small impurities in the dry state, and provides open conditions for the removal of large sundries in the waste paper after the bulk packing, especially suitable for the conveyor to continuously and efficiently pick up waste.

Full automatic high speed bulk packing machine Equipment structure

This series of bulk charter machine is composed of cylinder body, feeding device, cylinder driving supporting wheel, supporting frame, slag connecting slot, cylinder axial positioning wheel, outer protective cover and power transmission system. Among them, the body of the bulk slag eliminator barrel is provided with a feeding plate, a spiral belt and a slag eliminator hole. Lifting plate, spiral belt are fixed in the package materil drum of slag on the inner wall of lifting plate fixed to the package materil slag on the cylinder wall, slag hole is set in the package materil slag hole on cylinder, bale off the outside of the drum of slag fixed barrel race, two race falls on the cylinder at the bottom of the drive wheel, slag tank is set in the lower part of the package materil in addition to the drum of slag has a page or two inclined plate, round barrel axial positioning in package materil slag roller center of the bottom of the inside of the two outer raceway, feeding device in the package materil slag drum into the feed port.

Supporting equipment and process flow of this series of bulk charter

Bulk bag filter slag and feeding chain plate conveyor and pick chain plate conveyor (or pick belt conveyor) and other equipment constitute the waste paper bulk bag dry screening system.

Process flow: waste paper → bag-feeding chain plate conveyor → bulk charter → chain-feeding chain plate conveyor (or belt conveyor) → shredder.

Full automatic high speed bulk packing machine working principle

Packaging solid waste paper bound by feeding chain plate conveyor to the feeding device, the feeding mouth into the spinning package materil slag drum, lifting plate tied paper material mentioned a certain height, whereabouts (in free fall), crashed into the spiral belt, lifting plate and cylinder wall by the fall in the body, a tear, pressure, hit, squeeze, etc, at the same time the material by the spiral belt conveyor, the paper bound, in turn, forward displacement, repeat the process in a row, make solid paper bundle dismembered, thus sandwiched between the waste paper hard particle impurities by slag hole is separated out, and fell into the slag tank, dispersed by loose waste paper by charter port out flat out on the chosen chain conveyor, After manual selection, it is sent to the pulp system.

Welcome to the Website of China machinery supplier

More mechanical products

Please click: https://www.0086yes.com

E-mail:cai@0086machine.com