Medium consistency pulping machine

Medium consistency pulping machine Product introduction

Medium consistency pulping machine is mainly used to break all kinds of pulp board, damaged paper and all kinds of waste paper. It is an ideal equipment for waste paper pulp at present because of its strong dissolving ability, wide adaptability, simple structure and convenient operation and maintenance. This series of hydraulic pulper is not only suitable for intermittent production but also suitable for continuous production.

Medium consistency pulping machine Structure principle

Medium consistency pulping machine is mainly composed of tank, rotor, transmission part, slurry level box (continuous type) and other parts.

When the pulper tank is filled with 1/2 water, start the motor, the pulp board, damaged paper or waste paper are uniformly put into the tank, the pulp after the separation is discharged through the sieve hole, foreign matter, heavy slag is collected in the sediment tank to discharge regularly. Due to the special structure of the rotor of this series of hydraulic pulper, when the rotor is rotating, the pulp is thrown from the center to all sides, and the vortex is generated in its center, so that the pulp board, damaged paper in the wet state get broken solution. The unbroken pieces of paper and fiber bundles were further dispersed in the clearance between the rotor and the sieve plate. Due to the special shape of the end of the broken blade, it has the function of keeping the screen hole from being blocked.

Medium consistency pulping machine

The tank is welded by steel plates and has a conical mouth on the upper part to prevent splashing; The lower part has steel flange and the transmission part connection. The bottom of the tank has a guide plate to make the slurry reflux form circulation. The bottom of the tank is provided with a slagging mouth and a slagging tank to facilitate the discharge of impurities.

The lower part of the tank is equipped with a driving part, which is composed of spindle, bearing, bearing seat and belt pulley.

Below the rotor is the screen plate, there are a variety of specifications of screen holes for users to choose. Rotor and screen board distance is generally 3㎜, can adjust.

The pulp level box (continuous type) is a steel cylinder body connected with the pulp output pipe of the pulp breaking machine. It is equipped with an adjustable overflow gate to adjust the pulp level of the pulp breaking machine and control the quality of the pulp.

Welcome to the Website of China machinery supplier

More mechanical products

Please click: https://www.0086yes.com

E-mail:cai@0086machine.com