Shuttle glass screen printing machine

Shuttle glass screen printing machine Function features

Process: 1. The work piece - > glass center location -- - > printing - > > shuttle transmission through glass (detection) -- - > > discharging transmission dryers.

2. Servo motor is used for center positioning and shuttle transmission, which effectively ensures the accuracy of positioning and transmission.

3. For the printing parts that are easy to scratch and are not allowed to scratch, the working surface of the equipment is treated with special technology, so that the printing parts on the table are not scratched and wear-resistant, and the friction coefficient is low.

4. Adopt PLC working system, friendly touch screen man-machine interface operation panel, each adjusting mechanism is equipped with high precision position display, and equipped with fault display system and photoelectric protection device.

5. The machine head is horizontal and moving up and down. The well-known brand motor is adopted, and the Liming reducer is frequency conversion and stable.

Shuttle glass screen printing machine

6. The frequency conversion is used to control the scraping speed, and the scraping and covering can be adjusted at different speeds.

7. Screen plate adjustment adopts X and Y axis to move the alignment, simple and accurate.

8. The oil return knife can be set to cover the ink in advance, and cover the ink during printing to reduce the phenomenon of blocking plate and shadow.

9. Under the condition of not moving the wire frame, the scraper and the covering ink knife can be set for repeated action, and the accuracy will not be deformed.

10. All movements of the machine are controlled by PLC centrally, which can reduce the failure rate and easy maintenance.

11. Power supply control system adopts imported electrical components, pneumatic components, cylinder adopts international brands.

12. With the front cleaning, the back drying edge into automatic glass production line, efficient and accurate.