USD $13000~ $26000
Place of Origin: ZJ
Brand Name:RX
Quantity:
The machine is suitable for rubber, plastic and chemical industry raw materials mixing and refining processing.
Applicable products: E.V.A. foamed soles, rubber soles, TPR soles, rubber roller, rubber sponge, tires, sports ball, rubber ring, rubber hose, rubber belt, rubber pressed tight, cork, rubber oil seal, shock, sticky tape, elastic, masterbatch, ink, electrical parts of rubber, all kinds of vehicle rubber products and all kinds of chemical industrial raw materials.
strong pressure internal mixer characteristics
1. Rubber (plastic) and other additives are mixed or plasticized under closed, pressurized and temperature-controlled conditions, with high production efficiency, uniform material dispersion, excellent quality, free from environmental pollution, and convenient refuelling and color cleaning.
2. The mixing chamber, rotor, lead and other parts are equipped with jacket structure, which can be used for heating or cooling through medium, steam, heat conducting oil and water, so as to meet the requirements of various rubber refining (plastic refining) process. The processed materials are of good and stable quality.
3. The spiral Angle and working length of the rotor flange are designed reasonably, which can obtain the best kneading effect for the material. The peak of the rotor edge and the end face of the rotor are hardfaced, and the surface of the mixing chamber, the rotor and the weight in direct contact with the material is polished and polished with hard chromium plating, bright wear resistance and corrosion resistance.
4. Feeding from the rear door of the frame (or from the side), the mixing chamber turns forward to discharge 140°, which is convenient for the connection of processes up and down the production process, and convenient for the observation and cleaning of the mixing chamber and rotor.
5. The joint between the upper mouth of mixing chamber and the suspension wall of the frame adopts the labyrinth-type pressure sealing structure of arc plate groove, which has good sealing and dustproof effect. The rotor end face adopts contact external pressure type non-lubricated sealing structure, wear-resistant and durable.
6. The reversing mechanism adopts TOP enveloping worm pair (TOP) with high transmission efficiency, large bearing capacity, and can realize non-stop unloading, which avoids frequent starting of the motor and greatly extends its service life.
7, the electronic control system adopts PLC device, with perfect and reliable automatic control monitoring, alarm and other functions and necessary interlocking protection.
8, the machine is durable, low failure rate, easy installation, operation and maintenance, electricity saving.
Type no. : * 30 X (S) N - 110
Knead the total volume: -- -- -- -- -- -- -- -- -- -- -- -- ---- -- -- -- -- -- -- -- -- -- -- -- 250
Mixer total volume: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- ---- -- -- -- -- 110
Drive motor power: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --- -- -- -- -- ----- - 160 kw
Flip the motor power: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 5.5 KW
Turn turn Angle: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- - -- -- -- - -- -- -- -- -- -- -- 130 °
Rotor speed (front/back):--- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --- 30/24.5r/min
Working pressure of compressed air: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- ---0.6-0.8 Mpa
Amount of compressed air:-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- ≥1.5m3/min
Working pressure of cooling water (rubber refining) :---- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 0.3-0.4 Mpa
Working pressure of heated vapor (plastic refining): -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --0.5-0.8mpa
Exterior size :---- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- L4075mm W2700mm H3580mm
Weight: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --- -- -- -- -- -- -- -- -- 14500 kg
product | Quic | Quic |
![]() |
1
| set |
TO: Self Operated Mall
Your Message
Name:
Tel :
E-mail:
Country:
| Recommend matching suppliers if this supplier doesn’t contact me on Message Center within 24 hours.
| I agree to share my Business Card to the supplier.
Self Operated Mall
2Y
Tel:073184812133
E-mail:zg1@cmh.cn