USD $14000~ $28000
Place of Origin: ZJ
Waste cleaning automatic film cutting machine Product introduction
Waste cleaning automatic film cutting machine is mainly used for die-cutting, indentation and cold or hot pressing of cartons, cartons and trademarks in the printing and packaging industry. In particular, a variety of fine printing, such as cigarette boxes, wine boxes, gift boxes, small home appliances, cosmetics boxes, etc., can be die-cut concave and convex indentation on the machine, in order to obtain three-dimensional, delicate and beautiful printing products.
Waste cleaning automatic film cutting machine advantage
Feed paper part
1. Independently developed GW high-quality Feida head, 4 suction cups and 4 suction cups to ensure stable and fast paper feeding.
2. Prestack paper device, the maximum height of pile paper is 1600mm without stopping.
3. The pre-stack paper device is equipped with a track so that the operator can accurately and conveniently send the paper stack into the feida.
4. Side gauges can be adjusted between push and pull gauges to meet different paper needs.
5. Slow down the feed to the front gauge to position the paper accurately.
6. The transfer plate USES German moulded stainless steel for smooth and fast paper transfer.
Die cutting part
1. Adopt domestic servo motor to realize accurate and stable control of die-cutting pressure; At the same time, the pressure can be precisely controlled by pressing the 15-inch touch screen, and the adjustment is accurate to 0.01mm.
2. The die-cutting plate frame and the die-cutting underplate adopt Japanese SMC cylinder locking, to avoid the upper and lower plate frame locking installation is not in place, effectively avoid the loss caused by human factors operation.
3. Die - cutting plate frame using the center line positioning mode, so that operators in the installation of die - cutting plate no longer need to consider the left and right position of the die - cutting plate.
4. Also through the use of auxiliary tools, the installation of non-standard size of the die-cutting board, for the convenience of customers to realize the common between different models of die-cutting board.
5. The tooth row adopts adjustable tooth row structure, which is convenient for operators to maintain the production accuracy of the machine during the use of the machine.
1. The installation of the intermediate waste cleaning plate adopts the centerline fast positioning installation method, which enables the operator to install the waste cleaning plate quickly, reduces the start-up time of the operator, and improves the efficiency of changing orders.
2. Manually lift through the supercleaning waste box and select whether to use the cleaning waste function.
3. All waste cleaning tools adopt standard production, which can be replaced with machines of other brands.
Paper receiving part
1. Adjustable press brush controlled by AC motor to help remove paper from the teeth and stack.
2. The paper receiving department can control the whole machine through the 10.4-inch touch screen.
3. Auxiliary paper receiving stand can realize non-stop machine receiving.
4. American synchronous belt ensures wide selection of speed and huge bearing capacity, no maintenance and long service life.
Chinese machinery supplier
TO: Self Operated Mall
| Recommend matching suppliers if this supplier doesn’t contact me on Message Center within 24 hours.
| I agree to share my Business Card to the supplier.