USD $19000~ $39000
Place of Origin: ZJ
Automatic biaxial slitting machine introduction
Automatic biaxial slitting machine inherited the excellent advantages of ordinary high speed cutting machine, and into the customer's requirements for production efficiency to improve the mode
Automatic biaxial slitting machine characteristics
1. Winding is divided into upper double winding and single winding design. Taking volume is composed of two groups of winding, the winding is composed of a set of winding, taking volume is suitable for the pipe barrel diameter in 12.7 mm - 38.1 mm Φ Φ,
Winding diameter less than 300 mm, while the winding pipe fit diameter in 38.1 mm - 76 mm Φ Φ, winding over 300 mm in diameter.
2. Double shaft design is adopted for winding up. After the winding of one shaft is completed, the other shaft enters the winding state. The operator can load, unload and follow up the products of the previous shaft without delay.
3. The machine adopts programmable controller to coordinate with the human-machine interface for control, so as to ensure the stability of machine operation if the accuracy is improved.
4. The transmission system adopts synchronous belt transmission. Not only improve the transmission accuracy, ensure accurate feeding, but also effectively reduce the noise of machine operation, optimize the working environment.
5, the machine adopts double wallboard design, and the operation surface wallboard is processed as one, to prevent the tilt of the machine roller caused by long time of use, effectively increase the service life of the machine, ensure the accuracy of the machine, improve the quality of the machine.
TO: Self Operated Mall
| Recommend matching suppliers if this supplier doesn’t contact me on Message Center within 24 hours.
| I agree to share my Business Card to the supplier.