Full automatic waste cleaning deep pressing die - cutting machine

Full automatic waste cleaning deep pressing die - cutting machine Product introduction

On the basis of automatic deep embossing die-cutting machine, the function of waste cleaning has been added, which can solve embossing, die-cutting and waste cleaning processes at one time, greatly improving work efficiency. 580 tons of die-cutting embossing pressure, with 12 independent heating temperature area, perfect combination of temperature and pressure, hot embossing, hot embossing, hot embossing and other processes such as the general simple. The maximum thickness of 16 cm wallboard, as well as the various parts of the strengthening device, make the embossing process as smooth as Mount Mountain, and ensure the high precision of the product.

Full automatic waste cleaning deep pressing die - cutting machine Description of product structure

1.Feida Department

High speed paper feeding feida head, made of special alloy material, and adopts 4 suction 4 feed 8 strong suction nozzle, and can freely adjust the front, back, high and low of Feida head according to the paper situation, to ensure the smooth feed from 60 g/m2 thin paper to 2000 g/m2 cardboard and corrugated paper. The high speed Feida has the function of eliminating static electricity to ensure the smoothness of paper transfer process and the accuracy of subsequent work.

2.Paper feeding department

Tilting paper feeding table, more suitable for high speed under the transport and positioning of thin paper. Pull, push dual side gauge device, can be adjusted according to the paper switch, easy to operate. In place deceleration mechanism to make the conveying process more stable. Double check and control system to ensure paper feeding safety and avoid paper waste.

3. Main engine Department

The crankshaft, worm, worm wheel and elbow shaft of the main parts of the main engine are all made of imported high quality alloy, and our unique manual tile scraping process can greatly improve the operating life and stability of the main engine. The turbo crank drives the toggle type high-precision plane die-cutting table, and the fixed high-precision plane die-cutting table ensures the level and accuracy of die-cutting.

4. Pneumatic clutch

Italian OPMI imported pneumatic clutch, which can effectively reduce the noise during machine operation and reduce aerodynamic impact. Combined with electric digital display, simple and accurate control of the rise and fall pressure of die cutting platform.

5.Intermittent divider and torque limiter

Taiwan imported intermittent divider and torque limiter - technology multi - chip parallel CAM intermittent chain - row transmission device, long service life. High sensitivity not only ensures the safety of the machine, but also ensures the personal safety of operators.

6. Embossing part

On the die-cutting platform, 12 independent heating areas are added, which can control the temperature independently according to different products. At the same time, precise heating and temperature control can save electricity. High strength and heat resistant castings are used in hot - pressed honeycomb version, without deformation at high temperature. Hot-pressing honeycomb and die-cutting template can be replaced with each other, so as to realize the conversion of hot-pressing and die-cutting functions.

7.The Ministry of Cleaning and Waste

Triple co-moving waste cleaning device, the action is harmonious, precise and powerful, can effectively clear all kinds of special-shaped waste, the middle and the surrounding waste (including the edge of its mouth). It is easy and quick to load and unload the upper and lower moulds through the drawer type scrap clearing mode. Cleaning waste punching needle and elastic ejector bar can easily remove waste hole edges ≧3mm.

8.tooth platoon chain

The tooth platoon and the tooth platoon chain are made of special super rigid aluminum alloy from Taiwan, and the surface is anodized, which can realize precision die-cutting, embossing and other processes in high-speed movement, and perfectly realize high-precision control. The main transmission chain of tooth rack adopts the special chain of German Reinaud, the strength of which is enhanced by 45%, which extends the service life and improves the stability of machine operation.

9.Paper receiving department

The paper receiving department keeps the paper receiving device, which can realize orderly and automatic paper receiving, greatly improving work efficiency. Do not stop the sampling device, can view the die-cutting paper at any time. Stepped-adjustable brush and paper blowing device realize stable recovery of finished products.